An ignition lock cylinder is the part of your vehicle behind your steering wheel where you insert the key to start the vehicle. Sometimes an ignition lock gets worn out, stuck or you might not have a key. If you are having trouble with your ignition lock cylinder and you don’t have a key you can easily learn how to remove ignition lock cylinder without key by following some simple steps. This blog will guide you through the steps whether you drive a GM vehicle or Chevy.
Why You Need to Remove Ignition Lock Cylinder?
There are a few reasons why you might need to remove the ignition lock cylinder:
- You lost the key, and now you can’t start your car.
- The ignition lock cylinder is jammed or damaged.
- You’re replacing the entire ignition system or doing repairs.
Tools Needed to Remove a Ignition Lock Cylinder Without Key
Make sure you have the right tools to do the job, you’ll need:
- Screwdriver (Flathead) – This will help you open parts of the ignition system.
- Wrench or Socket Set – To remove bolts or screws.
- Paperclip or Metal Pick – To reach into the ignition cylinder.
- Pliers – To pull parts if they get stuck.
- Steering Wheel Puller (optional) – In some cars, you may need this to access the ignition cylinder.
How to Remove Ignition Lock Cylinder Without a Key: Step-by-Step
Here are simple steps how to remove the ignition lock cylinder without key for different car models, like GM or Chevy vehicles:
Step 1: Disconnect the Car Battery
Before starting, disconnect the car battery by removing the negative cable for safety. This ensures there is no electric current flowing while you work on the car. It prevents electric shocks or damage to your vehicle.
Step 2: Remove the Steering Wheel
In most cars, the ignition lock cylinder is located near the steering wheel. You may need to remove the steering wheel to access it.
- Use a steering wheel puller if necessary.
- Remove any screws or bolts holding the steering wheel in place using your wrench or socket set.
Step 3: Access the Ignition Lock Cylinder
Once the steering wheel is removed, you should see the ignition switch and lock cylinder housing. Here’s how to access it:
- Find the panel covering the ignition switch.
- Use a flathead screwdriver to gently pry the panel off.
- You will now have access to the ignition lock cylinder.
Step 4: Locate the Lock Release Mechanism
Most ignition lock cylinders have a small lock release button or hole that you can press to remove the cylinder. If you have lost the key, you will need to press this release manually.
- Insert a paperclip or metal pick into the release hole or mechanism.
- Gently press down to release the lock cylinder.
- You should be able to pull the ignition lock cylinder out using pliers.
Step 5: Remove the Ignition Lock Cylinder
Once the release mechanism is triggered, the ignition lock cylinder should slide out easily. If it’s stuck, carefully use the pliers to wiggle it free. Be gentle to avoid damaging other parts.
How to Remove GM Ignition Lock Cylinder Without a Key
If you own a GM vehicle, the process is quite similar:
- Disconnect the battery.
- Remove the steering wheel (you may need a steering wheel puller).
- Access the ignition lock cylinder by removing the cover.
- Find the release pin by inserting a thin tool like a paperclip into the hole next to the cylinder.
- Press the release pin, and the lock cylinder will come loose.
- Pull the ignition lock cylinder out using pliers if necessary.
How to Remove Ignition Lock Cylinder Without Key Chevy
Removing the ignition lock cylinder from a Chevy vehicle follows a similar process:
- Disconnect the battery.
- Remove the steering column cover.
- Insert a paperclip or metal pick into the release hole.
- Press the release pin and pull the cylinder out.
Final Thoughts
Now that you know how to remove ignition lock cylinder without key, you can take control of this DIY task. Whether it’s a GM or Chevy vehicle, the steps remain mostly the same. Always remember to disconnect the battery before you start working on your vehicle for safety.
If you’re still struggling with how to remove an ignition lock cylinder without a key, feel free to reach out to a professional mechanic or consult your vehicle’s manual.
